Kyneton

Through JV3 modelling, construction cost was reduced by keeping new walls from new works (insulation). This was done by decreasing averaged U value from U5.5 to U4.8 and by adding 20% more insulation to the roof/ceiling.

Please click here for more details on JV3 Performance Solution.

Feel free to navigate through dozens of our similar projects below:

Amir2022-12-23T07:40:42+00:00

Reservoir

Gallery

Reservoir

Through daylight modelling, the building achieved compliance with the minimum requirements of the local council and BESS IEQ.

Amir2023-06-19T08:58:34+00:00

Energy efficiency, Section J, VURB, JV3, NCC, Facade calculator, BESS, ESD, SMP, SDA, Daylight modelling, Section J report, Part 3.12 report, Deemed to satisfy

Somerville

Gallery

Somerville

Single-glazing windows were enough to keep the proposed building facades reaching a maximum U-value of 2.0 as required by the NCC

Amir2025-01-30T04:04:28+00:00

Promised land

Gallery

Promised land

Commercial Energy Compliance

Promised land

Through JV3 modelling, glazing cost was reduced by increasing averaged U-value from U4.5 to U5.2

Amir2023-06-19T08:08:49+00:00

Prospect

Gallery

Prospect

For this Development project located in the cold region of Tasmania, we managed to cost-effectively achieve energy compliance through the JV3 Performance Solution pathway.

12 Next