Penguin

Through JV3 modelling, construction cost was reduced by keeping the concrete slab from any added insulation. This was done by decreasing averaged U value from U5.7 to U4.4 and by adding 120% more insulation to the walls.

Please click here for more details on JV3 Performance Solution.

Feel free to navigate through dozens of our similar projects below:

Amir2023-06-19T08:58:34+00:00

Energy efficiency, Section J, VURB, JV3, NCC, Facade calculator, BESS, ESD, SMP, SDA, Daylight modelling, Section J report, Part 3.12 report, Deemed to satisfy

Somerville

Gallery

Somerville

Single-glazing windows were enough to keep the proposed building facades reaching a maximum U-value of 2.0 as required by the NCC

Amir2023-03-08T03:19:42+00:00

verification method, alternative solution, performance solution, NCC, BCA, energy efficiency, JV3 assessment, JV3 performance solution, VURB, verification using a reference building, Deemed to Satisfy, DTS, Section J, Performance Requirement, daylight modelling, daylight factor, sda, spatial daylight autonomy, glare, illuminance, natural light, part f4, energy assessment

Newtown

Gallery

Newtown

By implementing passive solutions, we get to improve thermal comfort by 24%, achieving PMV between -2 and +2 for 93% of the operating hours.

Amir2022-12-23T07:40:42+00:00

Reservoir

Gallery

Reservoir

Through daylight modelling, the building achieved compliance with the minimum requirements of the local council and BESS IEQ.

Amir2022-02-13T21:29:08+00:00

Narre Warren

Gallery

Narre Warren

Through JV3 modelling, construction cost was reduced by keeping the concrete slab from any added insulation

Previous 234 Next