Tyabb

Through JV3 modelling, construction cost was reduced by keeping existing walls from new works (insulation). This was done by decreasing the average U value from U4.4 to U3.7 and by adding 100% less insulation to the walls and 125% more insulation to the ceilings.

Please click here for more details on JV3 Performance Solution.

Feel free to navigate through dozens of our similar projects below:

Amir2022-02-13T21:31:25+00:00

Stawell

Gallery

Stawell

Through JV3 modelling, construction cost was reduced by keeping existing walls from new works (insulation).

Amir2023-06-19T08:58:34+00:00

Energy efficiency, Section J, VURB, JV3, NCC, Facade calculator, BESS, ESD, SMP, SDA, Daylight modelling, Section J report, Part 3.12 report, Deemed to satisfy

Somerville

Gallery

Somerville

Single-glazing windows were enough to keep the proposed building facades reaching a maximum U-value of 2.0 as required by the NCC

Amir2022-12-23T07:40:42+00:00

Reservoir

Gallery

Reservoir

Through daylight modelling, the building achieved compliance with the minimum requirements of the local council and BESS IEQ.

Amir2023-06-19T08:08:49+00:00

JV3 Performance Solution NCC BCA Facade Calculator Performance Requirement Section J Stem Energy Compliance DTS for commercial building

Prospect

Gallery

Prospect

For this Development project located in the cold region of Tasmania, we managed to cost-effectively achieve energy compliance through the JV3 Performance Solution pathway.

Previous 234 Next