Is daylight modelling involved in JV3 assessment?
No. daylight modelling is not directly involved in JV3 modelling. [...]
What are energy compliance for commercial buildings in Australia?
Generally for the commercial buildings, there are two pathways for [...]
What solutions help with energy compliance using JV3?
Using JV3 verification method, the proposed building achieves compliance if [...]
Does a passive design help with compliance using JV3?
No, a good passive building design uses less energy and [...]
How a JV3 assessment is done?
To undertake a JV3 assessment, you need to model your [...]
Can I use JV3 for a residential dwelling?
No JV3 is a specific compliance method for commercial buildings. [...]
Which is better? JV2 or JV3?
Though the differences between a JV2 and JV3 are minor [...]
What is the difference between VURB and JV3?
VURB and JV3 are both verification methods of compliance with [...]
Can apartments use JV3 alternative solution?
Under NCC 2019 it is not possible to use JV3 [...]
What building classes can use JV3?
Under NCC 2019, common area of Class 2 buildings, Class [...]
Can I have JV3 assessment for an alteration or addition project?
Generally, yes you can. But to answer in details, this [...]
Does JV3 allow to offset building demand with solar PV or hot water generation?
Yes. using JV3 assessment, Commercial buildings can benefit from onsite [...]
How long a JV3 modelling does take?
Here at Energy Compliance Consultants, we deliver our JV3 reports [...]
How much does a JV3 report cost?
A JV3 assessment requires a 3D modelling of the project [...]
Can JV3 assist with reducing window and other construction costs?
Yes. You can use low cost single glazed windows or [...]
What is JV3?
JV3 method is a pathway to energy compliance with way [...]
What are the 8 climate zones in Australia?
There are lots of climate classifications but the most useful [...]